Mount World 1056 VESA 200 x 200 Universal Adapter for Medium Mounts (Adapter can be used for tv from 23" - 42" size)

We have two 40 inch TV's in our bedroom and we needed this adapter mount plate to put up a new Toshiba TV that we bought recently. We had a Samsung and it went out after years of service and that mounting plate didn't work for the new Toshiba. So we ordered this one off of Amazon and it came in perfect condition and worked great for the new Toshiba 40 inch TV. Would recommend to anyone needing a multi screw able mount for your specific TV.

I used this adapter plate successfully for two separate jobs: first, to attach a Samsung 43-inch TV (200-mm Vesa pattern) to a medium-duty Huanuo single-monitor mount (75-/100-mm Vesa pattern, 19.8-lb capacity), and subsequently to attach a 43-inch Sony 'Bravia 3' TV (200-mm Vesa pattern) on a heavy-duty Huanuo monitor mount (75-/100-mm Vesa pattern, 26.48-lb capacity). In both instances, the adapter plate worked fine to bridge the difference in Vesa patterns. It was very helpful that the Mount Plus adapter plate came with a variety of nuts, bolts, and spacers to attach things together. For the first job, I needed no additional hardware because the Mount Plus 1056 came with everything I needed and did not have already. In the second instance, I had to add four optional washers to the mount bolts that attach the adapter plate to the TV. (The Samsung and Sony TVs require different-sized bolts for mounting.) The adapter plate did its job perfectly each time. Great job, Mount Plus! Pro tip: If you use this Mount Plus adapter plate, attach it to your swivel mount first, taking care to put the screw heads toward the TV so they sit flush without touching the TV. Tighten the four nuts so the adapter plate is fully attached to your swivel mount. Next (finally), attach the adapter plate to your TV. Don't over-tighten the bolts or they may damage your TV/monitor. If you reverse the order and try to attach the adapter plate to your TV/monitor in the first step (before attaching the adapter plate to your mount), you will have trouble tightening the bolts that attach the adapter to your swivel mount because they will spin in place as you try to tighten the nuts. You must have a screw driver and a small wrench or pair of pliers to tighten the bolts that attach this adapter plate to your swivel mount. Good luck!

We couldn't have used the tv stand without those additional piece. I couldn't be more positive that this piece made it all possible. This is a "Must Buy" for a larger TV.

So we originally got this mount adapter plate because our TV in our RV went out and had to get a new TV. The old TV only needed a 100x100 mount and the new one required 200x200. This mount is good quality and has the correct hole measurements it says it does. It goes from 50x50 up to 200x200 which is really nice to have so many options. It comes with some included hardware as well. But once trying to install this mount i realized the included hardware is not the correct sizes it says. The new TV required size M6x10mm screws and according to the hardware included there were bigger sizes than that. But even the included M8x12mm screws did not fit. They were too skinny or not long enough. I ended up having to purchase another universal hardware kit to install this mount adapter. On top of the hardware not being the labeled sizes, they are incorrectly labeled from the packaging to the instructions. So it was very confusing to even figure out what each hardware piece was. The adapter plate itself works great though. We did end up having to drill two holes in the plate, because the mounting bracket was too low for where the mount sat on the plate. It was very easy to drill the two holes and make it work the way we needed it to. It not fitting had nothing to do with the plate adapter, but it is nice that you can easily adjust this plate adapter work to how you need it to. Overall it’s a decent option at a decent price. Just beware the hardware that is included is not the right sizes.

Mount works as it should

Good quality. The included hardware had all the right sizes and lengths for what I was trying to do! I wanted to repurpose a Samsung monitor stand to hold up a 32 inch TV as a central pedestal. Instead of the little factory legs at the right and left edges.

If you have a 4"x4" mount and an 8"x8" pattern on your TV (or anything in-between), this template is perfect. It comes with usable mounting screws, washers, spacers and even gripping bolts. Worked perfectly for me. It is made of steel, and the bolt pattern options for the smaller mount are 3+ for sure. I highly recommend this solution as it appeared to me to be the most stable and flexible.

It didn’t have the correct screws and spacers for our installation. But worked once we stole spacers from another thing we purchased

excellent

Was exactly what I needed.