Xingyuan 4D Carbon Fibre Vinyl Film with Free Bubbles for Car Smooth Surface Decoration 50x150cm Red

Description

Size:50x150cm How to Apply Carbon Fiber to a Car or Any Other Object: 1.Clean Surfaces: Any surface that will have carbon fiber applied on it will need to be cleaned using a surface preparation system, like a cleaner or degreaser. Protective chemical gloves are need for this type of cleaner. The main point is to thoroughly clean the surface where the carbon fiber will go so there is not any dirt or dust that will be covered. Also be sure to dry the surface after cleaning it. 2.Prepare Carbon Fiber Vinyl: Pull out your carbon fiber roll, and cut off enough material to cover the surface. It's generally best to cut this piece larger than it needs to be and then cut it down to size after it's layered over the object. This ensures that the cut piece is not too small, which would force a brand new piece to be cut, which would also waste precious carbon fiber material. 3.Remove Adhesive Cover: Once a piece of carbon fiber is cut to fit the object that will be wrapped, completely remove the adhesive cover SLOWLY from the carbon fiber vinyl. This should be done with two people if the adhesive cover cannot easily be removed by yourself. It's very important not to let the material backing touch itself during this step. 4.Apply Carbon Fiber Vinyl: Once the adhesive cover is off the vinyl piece, simply center the piece over the object being covered. Then, use a smoothing tool (squeegee) to remove any bubbles from the material. Using a heat gun helps to smooth out the carbon fiber vinyl as bubbles are being removed from it. The use of a heat gun also works wonders to help fit the carbon fiber to any kind of curved object. 5.Cut Excess Material: After the entire surface is covered with smooth carbon fiber vinyl wrap, cut off any excess material hanging over the edges of the object. Smooth and heat the edges one last time after they've been cut to the exact size of the object.