Giantex 2 Pack Patio Lounge Chair, Outdoor Chaise Lounge with 5 Adjustable Backrest, Sturdy Steel Frame, Sunbathing Recliner, Beach Chair, Tanning Chair for Outside, Yard, Balcony, Pool Chairs, Brown

Very sturdy and comfortable. I did not put it together, I had my handyman do it, but he didn't complain and he was done very quickly.

This is a really nice chaise lounge. The instructions are a little bit confusing, but after you get the first one right, the next one is a breeze. Before you start to assemble, I suggest identifying the 'front' or 'chaise forward' side of each piece. The pieces that were most difficult were the piece that the arms attach to and the arms themselves. The front of the piece that the arms attach to is the 'curved' side and the arms are higher and more square to the front and lower with more of an angle to the back. The arms will not fit the other way so it will become obvious during assembly. The only complaint that I have is that the 'nipple' caps for the end of the screws do not stay on. I plan to find a way to attach them so were not looking at exposed metal. I chose this chair because it has arms and it was at a low price point with decent reviews. If you're questioning whether or not you want a chaise with arms, consider older people that may be using them. An arm helps them get a nice boost up out of the chaise. I purchased the Navy color that has a nice neutral-ish brown/black metal frame. This navy color coordinated perfectly with the Yaheetech Navy Blue 9ft solar lighted patio umbrella. It was a happy surprise!

I am between 3 and 4 stars for these chairs. Once built, they are sturdy and nice looking. There were a few dings and scratches that downgrade them. Directions are not very good at all. Each chair took me an hour to assemble. The biggest issue is the armrest portions which have a definite front and back but are not labeled anywhere or designated on the instructions. The side that has the sharper curve should go to the front of the chair. The backrest is a bit of a pain as well. Be sure to get a washer on both sides where the rest pivots. The mounts are bent out slightly and take a wee bit of bend to get the nuts to bite on. Best to install laying it down on the chair as shown in second picture. Also, pull out a 10mm socket or wrench instead of the provided mini wrench. Overall, the quality control and instructions don't make this an outstanding value, but rather a good buy with your patience. Hope this helps. 3.5 stars. UPDATE: Those experiencing the rusty water issue. Drill a 3/16" hole into the bottom of each of the plastic leg caps to allow any moisture to drain out instead of accumulating.

Update: I live in the desert and after a few summer months outdoors, the fabric discolored terribly. And there is rust on the concrete patio from the legs. Not good. --------- Firstly, most of the assembly was easy. Putting on the little legs, and connecting the fabric covered seat and back all went easily. I took the tip someone else left and didn't tighten screws until fully assembled. The major problem is that the manufacturer does not label the arms for front or back. There is a very slight difference in the shape and its easy to put them on wrong. Also, the curvature of them made it a bit tricky to connect to the seat base, but a little tugging made it work. Ultimately, I got them assembled and they are very nice.

Easy to put together and comfy

I live in Texas, I purchased these in September and it is now November. So for this review understand that they have not received an excessive amount of use or been in the elements for more than two months. These are priced decently, easy to assemble, lightweight, and fairly sturdy. However, they are uncomfortable. When sitting in them it feels as though your sitting directly on the bar and when laid completely flat it doesn’t provide a flat surface for one to lay on which also makes it uncomfortable. I say this being a 120lb 5’2 woman. One of the chairs fabric has started to become discolored and both are already rusting. If you are needing some cheap longe chairs for an area that won’t receive any moisture then these would probably work great but I can’t recommend them for use in the elements or near a pool….or if your wishing for a comfortable place to sit or lay out. 😕

Why did you pick this product vs others?: Color and styling for my deck Sturdiness: Very sturdy! Ease of assembly: easy to follow instructions. Tolerances tight, which adds to the sturdiness. A few extra pieces of hardware in case any get lost during shipping. Foldability: Folds for easy storage. Reclining ability: Reclines nicely for laying out to get sun! Comfort: very comfortable!

This is an awesome Lounge chair ☀️ It’s very well made and sturdy. We recently put up an above-ground pool. We are so excited to use the pool when it warms up more!☀️ I was a little but hesitant to spend over hundred on a lounge chair, but I am glad I did. It’s the perfect chair for me & my family! It came on time and very little assembly needed! Very comfortable and plenty of room for myself & my tall (6’2, 230 pounds) husband! It has very good back support & is very easy to adjust!☀️ Also very easy to fold and storage, whenever we’re not using it. We actually love it so much that I’m going to buy another one just like it! If you love lounge chairs in your backyard or pool area or just about anywhere… You will love this lounge chair! It’s super comfortable and easy to use and store!☀️❤️

inicialmente compré dos para verlas fisicamente y terminé comprando otro par. Excelentes, buen tamaño, ideales para la alberca y el jardín. ligeras y plegables, se pueden quitar y poner facilmente

This chair is very well designed and made. The welds look carefully done, paint (powder coating?) appears to be durable. Fabric is stretched tight and the item pieces fit together nicely when bolting the assembly together. Sturdy, and comfortable when a pad is on top, but can of course be used without a pad as well. Assembly tip, the arms are curved slightly differently on each side of the arc. The shallower curve is to the rear of the chair, as per the picture attached. I had it backwards when I first assembled it, and wondered why the bracket fit was a bit off. One bolt stripped while assembling the unit. I have requested the vendor send another bolt, but otherwise I will hunt one down at the hardware store. The bolts are metric, M6, there are three different lenghts used, so make sure you are using the correct length bolt when doing the assembly.

I ordered a set of two of these chairs. They are pretty decent, considering the price point. I had no trouble assembling, except that one chair came with the wrong backrest that didn’t fit. Customer service has since sent out a full new chair, and I don’t have to return the other one. As mentioned you can’t put it fully flat, but that’s okay for me. It’s comfortable with a lumbar support pillow, but I think we’ll add pads yet. Overall a good product for the price.

Busque por más de dos años camastros que estuvieran bonitos, de material duradero, que se pudieran mojar y exponer al sol, me gustaron mucho. Voy a pedir otros dos.

These lounges are well made . You can sit on the end of the lounge and are safe and comfortable. They are nice looking. The back is adjustable for slant/height. I would definitely recommend this item.