Wall Mount Bike Repair Stand

Exactly as advertised. Makes routine maintenance and tire repair much easier. Quality construction. The two wall plates is a great idea. I have one mount on patio for working on bike and one mounted off patio for washing. Money well spent.

I bought this mount so I could set up a spot to wash my bike after hitting the trails. I screwed the plate to my deck and mount just slides in. It holds the bike fairly secure for washing and tune ups One thing to be mindful of is if you have wide handlebars, they'll hit the wall. Not a big deal but something to look out for. The package includes two wall plates so I'll mount the other to my work bench.

I screwed the metal plate on my fence.(It did not come with screws! Had to buy my own!) The orange rubber clamps do fall off(maybe for replacement?) it can be annoying. But easy to put back. You can also glue it. This works great when clamping it to the seat post BUT the weight up front makes the front tilt down. My frame isn't completely round so it's iffy when clamping it from the frame for me. You can adjust certain things to make it work to your liking. I'm happy I was able to to use it and clean my bike thoroughly, which is why I bought this. Plan on using this for my bike and my girls bike. Quality is not bad. The plastics feel pretty durable. The metal bar feels solid as well. Love that you can slide in and out of the metal frame. Would recommend when you don't have space for a big tripod looking bike holder.

Stand alone racks are a pain to drag around and wall mounted units are a hazard waiting to be run into. This is an excellent alternative. Bonus is the extra mounting plate (one in the shop, one in the garage). Only downside is the rotation does not fix very well so the bike will rotate if you press down on a wheel.

It works pretty well but has trouble securely gripping the bike frame. I'm concerned that by cranking it down very tight, it will eventually break. Stickier rubber in the gripping area might help.

I just started biking in March, and wanted something that would help me work on the bike myself without having to go into a shop and spend more money. This has been a lifesaver. I have it set up on my workbench, and it has been solid. I have done lots of maintenance, from swapping out the rear derailleur to replacing the handlebar and shifters. This has given me the opportunity to do it by myself, and has held up really well. It doesn't slip, and clamps down well so you don't have to worry about the bike slipping. While it did come with two mounts, I only use one and pivot the clamp when I want to change the position. Works great!

cheap and wont hold very well, spend the money and get a good one

keeps moving on the wall. never stayed still for me to work on bike. returned.

I love this thing! It's much cheaper than a freestanding stand, and works well with all types of bikes. I also think it's great that 2 brackets are included so you can use it in two locations without having to buy a second unit, minimizing clutter around your home.

No complaints. Sturdy. No flex under use. Twists a little, unless you crank down the allan-key bolt

This item arrived on time. Out of the box, it appears as promised. Two wall hangers which need to be secured via five (5) screws, to the wall or a post or something sturdy. Make sure you use screws with heads that don’t protrude too far otherwise it is difficult to get the plastic piece to slide in and out easily. I didn’t have any so I files and sanded down approximately 1/16” at the center top edge to allow the plastic piece to slide in and out easily. The bar is aluminum and wide. I have put a 30 lb bike on it and it has stayed put. Yo do need to make sure the plastic foot is tightened around the bar quite tight so the bar will not rotate with the weight of the bike. It came with an 8mm Allen key to tighten the bar to the plastic base. It did not, however, come with a 4-or-5mm Allen key to tighten/loosen the clamp to the bar. I use the it horizontally mostly, but have used it to clamp the bike seat-post, a must for brake or gear cable replacements. To do this, I use the supplied 8mm Allen to loosen the bar at the base, rotate the bar to the vertical position and the Rex tighten the post at the base.

Great mount (arm) for bikes; takes minimal space. Comes with two mounting plates, which allow for different mounting heights or places (or a spare for later). Its easy to mount if you have the basic tools (drill/driver, screws, etc.). I did drill a hole in the center of the bottom mounting strip in the middle of the two bottom holes for extra strength (as my wall stud wasn't wide enough for all the mounting holes). The clasp is adjustable and can keep my bike stable for work etc.

No matter how much you tighten the jaws to the stem, the bike ends up tipping on the heavier side unless you are able to position dead centre --which pinces the frame mounted cables. This still works and is far better flipping the bike over