WR XX Pocket Knife Rough Black Synthetic Sod Buster Jr Item #18229 - (6137 SS) - Length Closed: 3 5/8 Inches

I got a good one ! One concern I had is that the grind on the side of the blade, in the photos, looks very coarse and file like compared to the CV blade and other Case knives which are very flat and polished (some times hollow ground obviously). Well I went ahead and ordered the SS steel Sod Buster and figured I could smooth it my self if I had too. I have smoothed and polished the sides of knives this way before so I knew what I was getting into. No problem. Running my fingernail over the side of the knife it is much smoother than it looks and I am happy. It is a work knife and I will use it just as it came. Good stuff ! The blade is centered well enough, There are very minor gaps between the scales and the liners but they are way thinner than a sheet of paper. Hardly anything. The brass pins and pivot look great with the blue handle and I like the color of the blue super well. Just what I wanted. The blade was plenty sharp enough out of the box. It had some wire edge but most all factory blades do. I touched it up on a hone and all is great. I cut up some stuff before this and the edge performed well; many people would be pleased with how it cut out of the box. Certainly NOT DULL by any stretch of the imagination. This is, as some have said, a good sized knife. Just what I wanted. Compares to the Buck 110. About half the weight or less though. Other than the kind of long length (closed) it is very pocketable where as the 110 is like having the head of a hammer in your pocket it is a must to carry the 110 in the pouch it comes with. I carry the Case Sod Buster in an ammo clip belt pouch as I do with many of my larger folders; my Benchmade Griptillian for example. The Sod Buster is too long to carry in the Buck 110 pouch. Bottom line : Case can still do it right and this is a VERY inexpensive knife and considering that it is made in the USA for the price they are practically paying you to carry their knife. For this price they aren't making much considering the vendor has to mark it up. Truth be told if I buy a good size pocket knife made in the US for under a hundred dollars I feel like I am under paying so keep that in mind. I wish I would have bought one of these years ago. It is "my kind" of handle shape and the blade shape and relation to the handle is very useful and comfortable. The smooth handle is a little slick (at this price you won't feel back about taking a file and adding some texture if it is too slick for you. I say buy it; very useful. Good quality.

Three months ago, I didn't know what a "sodbuster" was. However, since 1970, I have carried a wood-handled single blade knife that I picked up in Amsterdam while backpacking around Europe for a year. The pattern was somehow familiar to me; I just didn't know what it was called. Then, while prowling a knife forum, I came across a picture of my knife, right in the middle of a thread on sodbusters. Since it was made in Germany, it turns out my old knife is more properly called a "Hippekniep", or pocket knife. On these shores, it became known as a sodbuster, probably after the prairie-homesteading immigrant settlers who brought the knife from Europe and made it popular here. The Sodbuster is a no-nonsense working knife with a versatile drop point blade. The Sodbuster Jr. is a 2/3 scale version of the full-size sodbuster, about 6 1/2" overall with a 3" blade. A lot of manufacturers make this pattern; I chose Case because it is readily available and has a reputation for quality, which was evident in the full-sized sodbuster i had bought earlier. The Junior is more pocket-friendly than its big brother, and gets carried a lot more. The stainless blade came very sharp out of the box. I have not yet been tempted to sharpen it myself. I generally prefer carbon steel blades, particularly Case's chrome vanadium steel, but I am thoroughly satisfied with the performance of this blade. The stainless is a bit better suited for use with food, always a part of an EDC's agenda. One niggle: the blade does not center well when closed, and rubs slightly on the liner, something I was not able to catch buying online. A guy might want to phone the order in rather than ordering on-line, which would at least allow you to ask the vendor to check the knife over before sending it out. It is not serious enough to want to send the knife back, however, and apart from this detail, the fit and finish of the knife are excellent. One last thing: This knife looks fabulous in orange.

It’s a small case sod buster. What more to say? Knife came ok sharp out of the box but I always put my own edge regardless so it really didn’t matter. I won another stainless steel one and a large sod buster. Can’t beat em. Especially the fact that they are make in the USA.

Case: I have many higher end knives. 10 or so Benchmades, CRK, Spartan, ZT, among many others. I have 4 or so $400+ knives. Case is one of the first knife brands I recognized when I was a kid. Dad grew up 30 minutes from the Case/Zippo factory and my grandfather always carried a small stainless Case everyday. When I knew next to nothing about knives, I knew that Case was one of the standards. My 1st and 2nd "Real" knives (not some cheap fleamarket/hardware store counter knife) were Case knives and I was very proud of them and still have them. What I love about Case is that they are handmade in the US and are very very affordable. Arguably the best traditional pocket knives made. The knife itself: Iv been eyeing this knife for about 4 months. I added it to my basket, then "save for later". "Add" "Save" "Add" "Save" for months. Not really needing it but really wanting it. Finally bit the bullet and I couldn't be happier. This knife is everything I was hoping it to be and more for the price. First off, its a monster. I knew it was big but after finally getting it in person, its huge. It is a full size folding knife but also fairly light for its size due to the use of Delrin for the handles. I believe the knife handles are sanded on a belt by hand. You can tell its not by machine because of the "imperfect" symmetry of the grinding. I honestly love the hand ground look/feel. I feel like it is perfect in its "imperfection" and kind of cool knowing that no 2 knives are exactly alike. This particular model of SodBuster has a harder CV blade over the more common Stainless blade on the majority of their knives. So far I am a fan and think the CV is the obvious choice of steel over the stainless. There is a slight higher risk of corrosion with the CV blade but I am not even slightly worried about this. As long as I oil it after any excessive prolonged use in water/acidic liquids/environments and maybe every other month depending on use, It should be fine. The blade has a bit of a mirrored stonewash finish, personally love it. Steel is very easy to sharpen/touchup compared to my other higher end steels. I use a spyderco sharpmaker and it only takes a few swipes on the angled white fine stones before hair is falling everywhere. Also really love the brass liners/pins in these knives. This knife is a slip-joint (no locking mechanism to keep the blade from closing if force is applied to the top of the blade) however it has excellent strong retention when opened and closed. Really the only thing that made me a teeny tiny bit sad about this knife was that the blade is not centered. However it isn't that big of a deal for a $28 knife. I bought this knife specifically to throw into my hiking/camping/overnight/daypack for abuse. It will be my primary outdoor knife for whittling fine tinder, cutting cordage, and all other task until I need one of the fixed blades. The quality for the price is outstanding and I have no desire to baby it, at first sight you can tell its made for abuse.

Just what I needed

As usual, very good product.

I have two Sodbuster Jr's but was wanting something a tad bigger to complete my outdoor kit. I generally carry a Mora or equivalent on my belt, but I wanted a stop gap in case. The other reviews said that this thing was big, and it is. The handle is 4.5 inches long and the blade is 3.75 inches from handle to tip, with about 3.25 of sharpened steel. See the attached pictures for a comparison to the Sodbuster Jr. The knife is what I would consider Case's version of the Opinel's or Svord Peasent knife. Case provided everything you need for a heavy use knife: good grip, good blade shape and steel, and good quality. Where the money savings comes from is the quality of fit and finish. Handle: The handle is the classic yellow delrin (aka yellow plastic). It is strong and inert. The shape is simple but feels good in the hand. The edges are nicely rounded and the brass pins are flush. The length will support very large hands. Here is the first of my grips. The butt end of the knife has chamfered ends on the scales and as shown in the picture, were not shaped evenly. Not a big deal of course, for it is a knife under $30. Just be aware that if you own case knives already, the fit and finish are a tad rougher on these. Blade: If you have a Sodbuster Jr. or and Opinel, you will find this blade very familiar. It is technically a drop point, but the spine drops so little that it is basically a standard blade. The blade sports a full flat grind with "toothy" edge. The steel is stated to be Chrome Vanadium. from my short research on my Knife Steel App, it seems to be 1086. It is close to 1095, which I love. The heat treat on case blades seems to be just right. Hard enough to hold an edge, but soft enough to roll instead of chip. It does rust easily. I learned this the hard way during my long dye bath for the handles. The blade has a polish right below mirror. Great for carbon steel as there are less microscopic pit and divots to catch moisture. My other gripe about the knife is that the area behind the ricasso that slips under the back spring is a little rough. It doesn't effect functioning, but is very odd to see on a Case knife. Lock Up: This is a slip joint, so don't go whacking the spine on things. It will adversely effect your ability to have fingers. Blade deployment is the typical Case smooth. Backspring tension is just right. In fact I pinch to blade to open it instead of using the nail nick. 3/4 of the way open, it'll snap out. 3/4 of the way closed and it will snap in. Everything in between is smooth. Carry: This knife is big. If it had a pocket clip, it wouldn't be as problem. However, this will ride down in the pocket. I don't find having it laying horizontal in my front pocket very convenient. I didn't want to carry it in a sheath because that defeats the purpose I bought it for. I have found that it rides well in my watch pocket, with about 3/4 inch sticking out. It rides well and doesn't shift. Overall would recommend for anyone needing a large yet simple folder. Oh yeah, and I dyed mine red.

This review is going to be biased. Can't be helped. My first three knives were a Barlow (a really cheap one) a Victorinox and a Case stockman (or was it a trapper) . Idk, my dad stole all of these from me when I got old enough to do any damage with them. The case is the only one I miss. I'm tempted, as a 40 year old grown man, to go rifling through his drawers to find it. And my pellet gun. The Sodbuster is the biggest Case knife I've ever seen. My father-in-law carries a trapper and usually I got my Tx toothpick on me, but when I got this sucker, I was pretty impressed with its size. Let's get the obvious stuff out of the way, it's a slipjoint (a really easy one too), no pocket clip, no newfangled blade steel. It's a work knife for digging around in a garden. Some folks will be turned off by all of these things. I look at them as plusses. I'm not sure where the idea that a non-locking blade = dangerous came about. You really do have to handle slipjoints slightly differently than locking blades but they are just as safe if not safer in most contexts. It's a matter of exposure. I carved wood with my barlow for years, and occasionally the blade would stick or something but I always knew that could happen. I did have one close on my fingers once or twice but there wasn't any force behind it and not really anything happened as a result. I think most modern knife folks grew up with a slipjoint and maybe injured themselves with one as a kid, possibly while clowning around with it, to the point where as adults they think of them as an unnecessary hazard. The pocket clip... well I could take it or leave it. It's easier for a work knife not to have to fish around in my pocket for it repeatedly. That said, mostly I leave this one on my desk or table. Not sure I would carry it around in public. It's mighty big for a pocket. As for the blade steel, I generally prefer high carbon steel. I can sharpen such a knife really well with a stone. I'm not sure that I really like the edge retention of modern steels. I have an r2d2 - I have yet to sharpen it, but I'm guessing it will be a pain in the butt. I know exactly what to expect with softer steels.. In short, this is a fine knife appointed well for the last millenia. It's the folksier version of a RAT 1 and it will appeal to any who like the shape.

Bien Super coupe Super design

Excelente navaja de carbón steel, calidad case ,calidad indiscutible, enviado antes de tiempo , filo de afeitar salido de la caja .

Ich habe dies Messer hier bei Amazon erworben, allerdings nicht zu dem aktuellen astronomischen Preis von etwa 60€, sondern von einem anderen Anbieter für etwa 26€ plus ca 5€ Zoll (Versand direkt aus USA, hat ewig gedauert, bis der Artikel überhaupt mal verschickt wurde...). Es war im Grunde kein echter Bedarf, da genügend Messer vorhanden, sondern eher Neugierde und Interesse an einem amerikanischen Klassiker. Insbesondere vor dem Hintergrund, dass Case, im Gegensatz zur Konkurrenz (Schrade) noch in USA und nicht in Fernost fertigt und die amerikanische Handwerkskunst und Qualität in den einschlägigen amerikanischen Messerforen und von amerikanischen Messerliebhabern auf Youtube ganz überschwänglich gelobt wird, waren meine Erwartungen entsprechend hoch. Nachdem ich kürzlich erstmalig in die USA gereist bin und gesehen habe, was die amerikanische Handwerkskunst z.B. beim Häuserbau bedeutet, haben sich die Erwartungen auf ein realistischeres Mass reduziert. Heute nun kam das gute Stück endlich an. Tja..... ein süsses kleines Taschenmesser mit niedlichem Schriftzug auf der Klinge. Die Rückenfeder ist überaus hart gespannt, was einer sicheren Benutzung natürlich entgegen kommt. Die recht kurze Klinge ist ordentlich scharf geschliffen. Von der Form her bietet sie sich für Brotzeiten an. Zum Schmieren von Butter, Streichwurst etc. sicher gut geeignet. Zum Abschneiden von Wurst etc. dürfte die Klinge ruhig länger sein. Der Griff ist verhältnismässig dick für die Hosentasche und liegt trotzdem nicht gut in der Hand. Zum einen ist das Material rutschig, zum anderen istndie Kante hinte unten mitunter etwas unangenehm. Der Kunststoff des Griffes fühlt sich etwas billig an für meinen Geschmack. Die Verarbeitungsqualität ist nicht besonders. Die Niete sind nicht ganz bündig, ebenso die Rückenfeder. Auch gibt es einen kleinen Spalt am Rücken und ein klein wenig seitliches Spiel. Sind alles Kleinigkeiten, die der Funktion keinen Abbruch tun, aber man muss auch nicht darüber ins Schwärmen geraten. Mich würde es direkt jucken, mal ein made in China Schrade sodbuster daneben zu halten. Glaub nicht, dass es merklich schlechter abschneidet, aber das ist Spekulation. Kann ich nun eine Kaufempfehlung aussprechen? Für 60€ definitiv nicht. Für die von mir gezahlten 31€ (inkl Zoll)..... ein klares kommt drauf an. Wenn man Taschenmesser sammelt und sich für die klassischen Alltagsmesser aus aller Welt interessiert, warum nicht. Wenn ich ein bezahlbares Messer suche, das unauffällig ist und einen hohen Gebrauchswert hat, gibt es Alternativen mit mehr bang for the buck. Um bei den Klassikern mit eher rustikaler Berarbeitung zu bleiben, wären da das Opinel, das Douk Douk und das Mercator zu nennen. Auch bekommt man für ca. 30€ schon ein perfekt verarbeitetes Löwenmesser aus Solingen. Oder wenn es was Neumodischeres sein darf, für etwa 28€ das Byrd Tern made in China. Seit ich das habe, nehme ich kaum noch ein anderes mit. Die Einhandöffnung ist super praktisch. Wenn man das mal selber erfahren hat, mag man es kaum missen. Trotzdem legal, da nicht verriegelbar. Sehr flach und verschwindet äusserst unauffällig in der Hosentasche. Bei der Suche nach einem Alltags-Gebrauchsmesser würde ich das in der Preisklasse 1000 mal vorziehen. Fazit: (noch) 4 Punkte für das Case Sodbuster (inklusive Klassiker-Bonus)

Tengo 4 Sodbuster y esta es la peor con diferencia , la caja venia aplastada , la hoja rayada , el muelle sobresale de las cachas con la hoja abierta , las camisas de laton , sobresalen mucho mas que las cachas , el filo viene con rebarba y las cachas parecen usadas , una de ellas tiene una deformaccion ....la voy a devolver ahora mismo

Excelente calidad