Rockville RX230 2-Way Stereo/3-Way Mono Crossover, XLR Input/Output, Adjustable Crossover Range, 24 dB/Octave Filters, Rack-Mountable for DJs and Live Sound

This crossover is working great so far. Not the top of The line product. But it works very good for the price

It does the job. My sound system has never been that crystal clear. It separates the high, the mid and low. Would recommend it!

I've had this for six years and just realized the front panel has the 500 and 5k hz labels for 1x and 10x ranges swapped above the Crossover Freq knobs, which is what prompted me to leave this review lol. I'm amazed no reviews have pointed that out or it was never corrected. Since getting it I've used it in a few different live PA setups and in a studio setting for processing audio... probably 400+ hours in use for events, and wouldn't be surprised at 2-3x that powered on.The biggest issue I've had with this crossover is that the XLR jacks aren't great, and sometimes the outputs won't make the best contact with cables (the pins may be slightly narrow). The blue LED is also a nightmare abomination. No issue with the pots so far. Sound quality is fine, and it's easy enough to upgrade various components, XLR jacks, LED if you're capable.When I bought this in 2018 it was $53, and at that price it was a great deal and significantly cheaper than any other option. At $100, it's competing with used crossovers that will be higher quality, so it looks like less of a bargain. However, if you need a crossover in a rush and you're on a budget, it's hard not to get your money's worth out of it.

first I'll say i'm a big fan of every piece of Rockville equipment i have bought and used...this crossover as well...you don't have to be an audio wizard to use this crossover...simple unit with simple instructions and Rockville has easy to follow videos that show you how to set up this unit and use it if you're nnot good with written manuals...i recently got into building speaker boxes and adding amps and speakers to my home audio setup...so it became necessary to have a crossover to direct frequencies to the appropriate speakers...easy to use...reasonably priced, and functions as stated...get one

Este crossover es un producto de muy buena calidad, yo estoy muy satisfecho con ésta compra.

Jumping right to it.Sounds quality was fine, the right channel XLR has already failed as others have mentioned in less than 72 hours. It is powered with 12v supplied power supply. It does create a loud audible thump if you power this up after all the amplifiers are on.

Anyone with a subwoofer knows: if there's any electronics in there with the sub they're gonna be rattled to pieces. That's what happened to my Adam speakers, pretty high end stuff. The 2.1 system started crackling during playback so I troubleshot it to the crossover that's built into the sub.I just put this between my monitor control and the speakers, and it works GREAT! If you really wanna hear what your system can do, you need to pay attention to crossover freqs!I have one complaint: Once you have it dialed in, adjustments are hair-sized! A very slight turn of the knobs makes large differences. That's what you end up with with a small form factor like this one.Good piece of gear.

I’ve used a lot of different amps and subs from cheap to high end name brands, with built in crossovers to get more punch, but was never satisfied. Thought I would try a separate crossover. This was cheap so I wouldn’t be out much if it didn’t work. I am amazed at the sound quality. Even using cheap subs and a Behringer I nuke 3000 turning off the built in crossover I have way more punch than before. Yes it has a loud pop when it turns on or off... just turn your amps on after it is on. Two small complaints about it. 1- it didn’t fit my rack, I had to extend the mounting holes, not a deal breaker. 2- I wish it had 1/4” outputs because I have never owned and amp with mic inputs on it. I had some adapters to try it out, will be getting more because it is staying in my rack.