737 Power Bank, 140W 24,000mAh 3-Port Laptop Charger, Smart Display | Fast Multi-Device Charging, for iPhone 16 / 15 / 14 Series, Vision Pro, Samsung, MacBook, and More

This is an awesome device. After some quick tests I can say it fully meets my needs and expectations. Yes, it is expensive, and at $150 I didn't think I could justify it. I got it on sale for $100 and I believe it was definitely worth it. The display is fantastic and really provides all the information you need in order to know what is going on with the inputs and outputs. My main use will be for charging the 50wh battery in my Surface Pro 8. The Anker 737 will charge it at a 55w rate via either of the two Thunderbolt ports (the supplied Microsoft charger is rated at 60w through the Surface connector), and it appears that the conversion efficiency is about 80%, meaning that it can fully charge the Surface and have capacity left over to charge a phone or two. (An interesting note about conversion efficiency based on some quick tests and calculations: If I charge my Surface Pro 8 from my Jackery 300’s PD port, it takes about 60wh to fully charge the 50wh battery. It appears that the Anker 737 will need to supply almost 70wh to fully charge the 50wh battery. If I connect the Microsoft AC adapter to the Jackery 300’s AC port and charge the Surface that way, it requires about 90wh to fully charge the 50wh battery. The more up and down conversions you do, the more you lose.) The supplied cord is rated for 140w and is 60cm long (NOT 6 cm as some have said), or about two feet. I had limited success with pass-through charging, YMMV. I connected a 45w charger and the Anker started charging at 42w. Then I connected a phone, which started charging at 10w, but the input to the Anker then dropped to an identical 10w. A different charger and a different load might give different results, I don't know. Others have complained about having difficulty charging DJI batteries. Here's what I think is going on (my best guess, anyway): I have the Mini 2 battery charging hub and three batteries. The hub appears to be happiest with an input of 12v, 1.5a. (The supplied DJI charger is rated at 9v, 2a and 12v, 1.5a.) USB-C PD 3.1 does not appear to support 12v, and when connected to the hub, the hub and the Anker can't seem to negotiate an 18w charging rate at 9v. HOWEVER, when I connect the hub to the Anker's USB-A port using the supplied DJI cable all is well and the hub charges at 18w. Some users have panicked over the USB-A port showing 0.1a with no load connected. Anker explains this on their support page (which takes some digging to find). 1. Make sure Trickle Charge mode is off (tap the button twice). 2. Wait two minutes after disconnecting a load from the USB-A port. 3. Relax. Some users have experienced less than expected charging rates. Not all USB cables are created equal. (In fact, back in the early days of USB-C there were some cables that didn’t meet the standard and were risky to use.) Make sure your cable supports the rate your device requires. I bought a six foot, 140w Anker cable to go along with the 737. That, plus the cable supplied with the 737, should meet all my needs.

This charger is heavier than it looks, so maybe for some people it might not be as convenient. I have no issue with it. It's not in my pocket. That was my 'negative' for this product. Now to the good stuff. Oh it didn't come with a charger but it comes with a charging cable rated at 140W to match the power bank max output and input charging. I don't own any of those Apple products but I did charge someone's Iphone with it with their cord, so I know it can charge Iphones if anyone is wondering. I really bought it thinking it would charge my son's laptop but it can't the port on his laptop doesn't allow charging, just data transfer. It's a gaming laptop, so even the Wattage was sufficient, there was no way to charge it with this device. It does charge a laptop I have here that has the port that allows it, as quickly as the laptop charger (that only outputs 45W) and yes the digital screen on the power bank shows it is outputting 45W to it. It will fluctuate between 42 to 46W but I think this is normal. When the laptop (or any other device connected to it) is fully charged, it will stop. I should check to see if it will start to charge again if I start using the device connected to it. It probably will though, this device kinda smart to check these things. It also allows you to charge devices while being charged. Maybe that is the new standard but not much power banks did that before, so the fact that this one does it pretty cool. Back to the screen. It displays some nice information. It will give you an estimate how long the connected device will take to reach 100% in real time. It also does this when you are charging the bank itself. It tells you how long it will take for it to be fully charged. Yes it can do it simultaneously. So it can tell you how it will take to reach 100% and tell you how long devices connected will take to reach 100%. While being charged, you can only charge two devices (USB A and USB C) because one of the ports (the main USB C) is both input and output. When it not being charged, it can charge 3 devices at the same time. Remember thought that device output 140W max so it will adjust accordingly. I am able to charge my laptop (the 45W one), my Samsung phone and some Bluetooth ear plugs (or another phone) all at once and it won't even run down the power bank. I don't use it daily, so I haven't needed it to charge it too often but it doesn't take long to charge. I honestly much check how long but I haven't needed more than an hour so far. I haven't run it down too low either, lowest being 15%. Off course it will take longer to charge if you are charging devices at the same time, although I haven't done so as it yet. Another thing I need to check. Now the questions people make ask.... tldr Is it worth this price? I paid 90 something for it, so yes worth it for me. Right now it cost $109.99, so still worth it for me. Now for the List Price of $149.99, I wasn't buying it at that price. Does it do what it states in the description section? Yes it does and then some. Everything is states it does is accurate. Will I buy it again? This will last for quite a while for me so hopefully I won't have to replace it soon. I am hoping by the time I will need to replace this that Anker will have upgraded this to something more powerful or more wattage ( they do have that presently) for a similar price or according to cost of living if you know what I mean. Do I recommend this? TOTALLY worth it at the prices I mentioned. I didn't say it in the review but because the smart charging with it, your devices are safe from overcharging and so on. Yes I trust my devices with this power bank more than the chargers that come with them. Hope this review was helpful.

I needed a charger that would reload my iPad Pro. I have a couple of quite powerful battery packs, but the best of them struggled even to maintain the iPad charge at the same level (though it does well in recharging my iPhone). So, more power needed. This battery is a chunk, It’s big and heavy. When I first got it, the booklet advised putting it on charge right away and, yes, that is needed. The display showed it at only 16% of full charge out of the box. I put it on a regular 3amp (about 15w) charger and the display usefully, if rather disappointingly, predicted it would take about 16 hours to full charge (It did start at 99 hours immediately, but then it got its act together and gave a more manageable timeframe though the timing does bounce around a bit). I left it on charge overnight and it was 100% the next day, so I’m guessing around 12 hours from 16% to 100%. I would have preferred faster, preferably a lot faster. But Est Quod Est… In my first trial at using the battery to charge my iPad the iPad was at 83% and the battery at 100%. It charged the iPad up to 100% in maybe 45 minutes which ran the battery down to 92%. So a 17% iPad charge resulted in an 8% run down on the battery, About a 2:1 ratio. That implies I should get two whole iPad charges out of one full battery charge and the charging should take about 6*45min or about 4.1/2 hours. Not too bad. Again. I would have preferred more charge for a shorter time. But this was only my first pass at calibrating the charging capability of this battery, so we’ll see how it pans out in the longer term. In the meantime, I really like the display. It shows the current draw, predicts charging time and shows the current charge level of the battery—all very useful metrics. It is chunky and quite heavy, which somewhat detracts from its portability, but more powerful batteries are always bigger and heavier. That’s just the way it is. My interim judgement is that it’s a plus and assuming it is able to reliably deliver charges to my iPad for a good number of battery recharge cycles, I will be happy I got it. I may update these metrics after I’ve run it for a while, but for now: recommended.

The main reason for purchasing this is to charge my M1 MacBook Pro and 2017 12.9 Inch iPad Pro simultaneously. When I originally got the power bank I charged it back up to full capacity. I ran into a few minor issues with the charging of my iPad Pro in terms of speed but it has calmed down as of late. I've run quite a few tests to see what it's capable of. UPDATE Anker 737 Test Results Charge iPhone XR, 2017 12.9 iPad Pro, M1 MacBook Pro: iPhone XR: 78% iPad Pro: 58% MacBook Pro: 70% Recharge Speed on RavPower 90watt 2 port charger: 10 minutes: 18.72% 20 minutes: 35.17% 30 minutes: 51.05% 40 minutes: 66.35% 50 minutes: 81.17% 1 hour: 96.37% Finish at: 1:03:18 Charging MacBook Pro: Finish at: 100% Remaining Capacity: 23% Charging iPad Pro and MacBook Pro: iPad Pro: 49% MacBook Pro: 78% Charging iPhone XR and iPad Pro: iPhone XR: 100% iPad Pro: 100% Remaining Capacity: 42% Charging MacBook Pro after 80 percent charge on Anker 737: MacBook Pro: 93% Charging Anker 737 after 35 minutes and charging iPad Pro: Anker 737: 62% iPad Pro: 100% Remaining Capacity: 13% Charging Anker 737 after 25 minutes and charging Nintendo Switch: Anker 737: 45% Nintendo Switch: 100% Remaining Capacity: 17% Charging MacBook Pro after 50 minute charge on Anker 737: Anker 737: 84% MacBook Pro: 100% Remaining Capacity: 12% Charging iPhone XR and MacBook Pro: iPhone XR: 98% MacBook Pro: 94% Charging iPhone XR, Nintendo Switch, and MacBook Pro: iPhone XR: 92% Nintendo Switch: 70% MacBook Pro: 86% Charging iPhone XR, Nintendo Switch, and iPad Pro: iPhone XR: 100% Nintendo Switch: 100% iPad Pro: 100% Remaining Capacity: 2% Charging MacBook Pro and Docked Mode Switch: MacBook Pro: Yes Docked Mode Switch: No Charge Power Bank for 10 minutes: iPhone XR: 86% Charge Power Bank for 20 minutes: Nintendo Switch: 88% Charge Power Bank for 30 minutes: iPad Pro: 81% Charge Power Bank for 40 minutes: MacBook Pro: 84% Anker 737 Powerbank Switch Dock + phone test: Anker 737 Percentage Used: 36% Anker 737 Percentage Remaining: 64% Time spent charging iPhone XR to full: 1: 1:53:28 Switch Dock time when using Anker 737: 6:11:37 Pass through Charging Test: 5 minutes: Anker 737 10.97% iPhone XR 10% 10 minutes: Anker 737 20.93% iPhone XR 16% 15 minutes: Anker 737 30.38% iPhone XR 23% 20 minutes: Anker 737 39.66% iPhone XR 29% 25 minutes: Anker 737 48.76% iPhone XR 36% 30 minutes: Anker 737 57.64% iPhone XR 43% 35 minutes: Anker 737 66.39% iPhone XR 50% 40 minutes: Anker 737 74.98% iPhone XR 57% 45 minutes: Anker 737 83.35% iPhone XR 63% 50 minutes: Anker 737 91.64% iPhone XR 69% 55 minutes: Anker 737 97.55% iPhone XR 75% 1 Hour: Anker 737 99.30% iPhone XR 80% When Anker 737(Just over an hour) is finished iPhone XR 80% It does come with a short 140 Watt USB C Cable to charge the power bank but it does NOT come with a wall charger to power it. Pros - Recharges quickly with a 100 Watt or higher charger(sold separately) - Recharges laptops at full speed and can trickle charge two high-end laptops - Smart display indicates tons of useful information such as battery percentage and wattage charging - Small enough to fit into a backpack Cons - Expensive($149.99) - Doesn't come with a wall charger - Occasionally has issues charging 2017 iPad Pro Overall, if you have a high-end USB-C laptop such as the 16-inch MacBook Pro, this is the best choice to go for in the sub-$200 range. Your laptop will thank you later

This is a great power bank. It charges fast. It a little bigger and heavier than I thought but still fits in my purse or backpack. I've had it for about 2-3 weeks and have only charged it once and it have charged my cell about 3 times and my headphones once. It's roughly 2lbs.

I've had a lot of power banks, upgrading with each new standard to try to keep up with charging rates my various devices will accept, and use these banks heavily. I use these for smartphones, earbuds, powering USB-powered devices (lights, tools, etc.) on the go, and laptops. I use it to supplement my Dell Precision M7750 Mobile Workstation - it has a Xeon processor and NVIDIA RTX 5000 graphics card, so it's a very stout, power-hungry laptop, and this power bank is able to extend the off-grid usage of the laptop by about 100%. However: In order to power the laptop with either a PD-to-Dell barrel adapter OR with a PD cable, I find I have to cold boot the laptop connected to the power bank in order for the power bank and laptop to negotiate a power rate that both the power bank and laptop will accept. Providing I do not disconnect the power bank from the laptop, the power bank will happily keep the laptop running until it is drained, then the laptop will draw from its internal battery pack. If I hotplug the power bank to the already-booted laptop, it will not negotiate a power level that the laptop will accept, and the power bank will start to draw a trickle charge from the laptop. I notice that the Anker Anker Prime 6-in-1 USB C Charging Station behaves in the same exact way, but as I do not have any other brand PD power supplies to test, nor do I have a PD sniffer/multimeter yet, I am unable to discern whether Anker or Dell is at fault. The power bank will not charge the internal battery when connected to a charger, but other devices are drawing current. Cons of this power bank: * Problems negotiating appropriate charge rates when hotplugged to Dell Precision laptops * Pass-through is supported, but will _not_ charge internal battery when passing through! (IMHO this is a massive flaw) Pros of this power bank: * it will display the current draw of the connected devices * It will display the exact %age of power remaining (and estimated time it will run the connected devices) * It will display ETA to full charge when charging * Eliminates need to use USB multimeter to test questionable cables (see: will display charge rates to connected devices) * shows number of equivalent full cycles the battery pack has done (good for assessing battery cell aging) Overall it's a great pack, but due to the Dell incompatibility issue and the poorly-implemented pass-through charge prompt me to deduct a star - a first for my rating of an Anker product. If you're going to implement pass-thru charging, implement it _properly_.

Very fast charger. Huge capacity. Worth the price for what you get, but it will sometimes go on sale. The two USB-C and USB-A ports ensure it fits older and newer cords. Sits in my backpack and takes a fair amount of abuse. The easy-to-read display is great for seeing how much power is being used to charge or how much power it's being charged with. I've used it almost daily for over a year, and it's still going strong.

Overall, the charger functions very well, and the on screen display is very nice for viewing the current power draw of devices / remaining charge. However, the plastic in front of the screen is very vulnerable to knocks and drops, and mine has gotten a crack in that plastic, which makes the display hard to read from some angles. Passthrough charging works, but the battery bank in most cases only charges the other device with incoming power, only charging itself after the device stops drawing power. I have only once had the bank charge itself and connected devices at the same time. Despite these flaws, the pack does handle high speed charge/discharging very well, staying surprisingly cool. Would buy again.

Does not come with a lead. Either to power source or to device to be charged. Instruction are too tiny to read. Discriminates against elderly and all visually impaired people.

Excelente produto. Carrega o smartphone muito rapidamente e consegue realizar várias recargas.

Die Anker 737 Powerbank (PowerCore 24K) ist ein leistungsstarker und vielseitiger externer Akku, der alles bietet, was man sich von einer hochwertigen Powerbank wünscht. Mit ihrer hohen Kapazität von 24.000mAh, der Schnellladeleistung von bis zu 140W und einem praktischen digitalen Display ist diese Powerbank ideal für alle, die unterwegs eine zuverlässige und leistungsstarke Ladelösung für ihre Geräte benötigen. Hier sind die Gründe, warum mich die Anker 737 Powerbank restlos überzeugt hat: 1. Imposante Kapazität für mehrere Geräte und lange Laufzeiten Mit 24.000mAh bietet die Anker 737 Powerbank ausreichend Kapazität, um Smartphones, Tablets, Laptops und andere Geräte mehrfach aufzuladen. Für Reisen, Campingausflüge oder den Alltag ist dies eine enorme Erleichterung, da man sich keine Gedanken über leere Akkus machen muss. Die Kapazität reicht aus, um ein modernes Smartphone bis zu fünfmal oder ein Tablet etwa zweimal komplett aufzuladen, was diese Powerbank zu einer idealen Wahl für alle Vielnutzer und Reisenden macht. 2. Leistungsstarke Schnellladefunktion mit 140W Die Anker 737 Powerbank überzeugt durch ihre 140W Schnellladefunktion, die selbst große Geräte wie Laptops schnell und zuverlässig auflädt. Dies ist ein entscheidender Vorteil gegenüber herkömmlichen Powerbanks, die oft nur für kleinere Geräte geeignet sind. Mit der Power Delivery-Technologie ist es möglich, beispielsweise ein MacBook oder andere USB-C-Laptops fast so schnell wie mit einem Netzteil aufzuladen. Die Ladeleistung ist konstant und stabil, was gerade bei größeren Geräten eine enorme Zeitersparnis bedeutet. 3. Drei Anschlüsse für gleichzeitiges Laden mehrerer Geräte Die Powerbank verfügt über drei Anschlüsse (zwei USB-C und einen USB-A), sodass mehrere Geräte gleichzeitig geladen werden können. Die beiden USB-C-Anschlüsse unterstützen hohe Ladegeschwindigkeiten, während der USB-A-Anschluss auch für ältere oder weniger energiehungrige Geräte geeignet ist. Diese Vielseitigkeit macht die Powerbank zu einer flexiblen Lösung, da sie verschiedene Gerätetypen gleichzeitig laden kann, was besonders auf Reisen und unterwegs praktisch ist. 4. Digitales Display für klare Übersicht über den Ladestatus Ein Highlight der Anker 737 Powerbank ist das digitale Display, das den aktuellen Ladestand, die verbleibende Kapazität und die Ladeleistung in Echtzeit anzeigt. Dies ist besonders hilfreich, um genau im Blick zu haben, wie viel Kapazität noch verfügbar ist und wie schnell die angeschlossenen Geräte geladen werden. Das Display ist gut lesbar und gibt detaillierte Informationen, die den Ladevorgang transparenter und planbarer machen – eine innovative und nützliche Funktion, die im Alltag echten Mehrwert bietet. 5. Hochwertige und langlebige Verarbeitung Die Anker 737 Powerbank ist robust verarbeitet und fühlt sich sehr hochwertig an. Die Materialqualität ist exzellent, und die Powerbank wirkt solide und stabil, sodass sie auch bei regelmäßigem Gebrauch lange hält. Das Gehäuse ist widerstandsfähig und hält sowohl Stößen als auch täglichem Transport in der Tasche oder im Rucksack problemlos stand. Die Verarbeitung zeigt, dass Anker bei der Qualität keine Kompromisse eingegangen ist, und macht die Powerbank zu einem langlebigen Begleiter. 6. Sicherheit und intelligentes Energiemanagement Wie von Anker gewohnt, sind in dieser Powerbank zahlreiche Schutzmechanismen integriert, die für sicheres Laden sorgen. Sie schützt vor Überhitzung, Überladung, Kurzschlüssen und bietet eine intelligente Stromverteilung für alle angeschlossenen Geräte. Das Energiemanagement optimiert die Ladeleistung automatisch und verteilt sie bedarfsgerecht, sodass jedes Gerät sicher und schnell geladen wird. Diese Sicherheitsfunktionen machen die Powerbank zu einer vertrauenswürdigen Wahl für hochwertige Geräte wie Laptops, Smartphones und Tablets. 7. Kompaktes und tragbares Design trotz hoher Kapazität Trotz der beeindruckenden Kapazität und Leistung ist die Anker 737 Powerbank erstaunlich kompakt und relativ leicht. Sie lässt sich problemlos in einer Tasche oder im Rucksack verstauen und ist damit gut für unterwegs geeignet. Das Design ist schlicht und modern, was die Powerbank optisch ansprechend und unaufdringlich macht. Die Kombination aus hoher Leistung und kompakter Bauweise macht sie zu einem echten Powerpaket, das sich vielseitig einsetzen lässt. 8. Exzellentes Preis-Leistungs-Verhältnis Für die Leistung, Vielseitigkeit und Qualität, die die Anker 737 Powerbank bietet, ist das Preis-Leistungs-Verhältnis ausgezeichnet. Die Powerbank ist eine langfristige Investition, die sich besonders für Vielnutzer und Reisende lohnt. Verglichen mit anderen Powerbanks in dieser Leistungsklasse sticht die Anker 737 durch ihre Funktionalität, ihre Kapazität und das innovative Display positiv hervor. Sie bietet alles, was man von einem modernen Ladegerät erwartet, und ist dabei noch erschwinglich. Fazit: Die Anker 737 Powerbank (PowerCore 24K) ist die perfekte Wahl für alle, die eine leistungsstarke, vielseitige und sichere Ladelösung für unterwegs suchen. Mit einer beeindruckenden Kapazität von 24.000mAh, einer Ladeleistung von bis zu 140W und einem praktischen digitalen Display bietet sie alles, was man von einer High-End-Powerbank erwarten kann. Die hochwertige Verarbeitung und die integrierten Sicherheitsfunktionen machen sie zu einer absolut empfehlenswerten Powerbank für Smartphones, Tablets, Laptops und mehr. Ein Must-have für alle, die auf lange Batterielaufzeiten und schnelles Laden angewiesen sind!

スマホ、ネッククーラー、そしてイベント用に自撮り棒などを夏の間ヘビーユーズするため、大容量のバッテリーが必要になりました。なので、こちらの方を購入しました。 宣伝文句通りすごい容量があり、1日使っても0になる事はありませんでした。充電もそこまでかからず、高出力ケーブルであればすぐ終わるかと思います。 またポートも3つあり、同時充電が三台までできます。 そして、残容量のUIがある画面が付いていますので、すぐ確認できるのでものすごく便利です。 唯一の弱点は重さでおそらく500ミリリットルのペットボトル位です。力が弱い方にはお勧めしません。おそらく主な用途はキャンプとかになるかと思います。

L'ANKER Power Bank, un'aggiunta formidabile alla gamma ANKER, mi ha lasciato un'impressione significativa. Innanzitutto, la qualità costruttiva di questo power bank è eccezionale. È solido e robusto, trasmettendo un senso di affidabilità. Tenendolo in mano, si percepisce che è un dispositivo costruito per durare, un fattore importante per i caricabatterie portatili destinati all'uso quotidiano e a occasionali maneggiamenti bruschi. Sebbene l'ANKER Power Bank sia ottimo in termini di costruzione, vale la pena notare che sembra piuttosto pesante. Il peso potrebbe sorprendere, data la notevole quantità di energia che contiene. Non è leggero come ci si potrebbe aspettare, ma questo peso extra è una testimonianza della potenza e della capacità che racchiude nel suo elegante design.Una caratteristica distintiva di questo power bank è lo schermo LCD. È un'aggiunta incredibilmente utile, che fornisce informazioni in tempo reale sulla potenza assorbita, sulla capacità residua della batteria e altri dati importanti. Questo garantisce di essere sempre aggiornati sullo stato del power bank, consentendo una gestione più efficace dell'alimentazione. La ricarica del power bank è incredibilmente rapida. Utilizzando un caricabatterie da 65 W, mi ci sono volute solo circa 2 ore per ricaricarlo completamente. Si tratta di un tempo di ricarica eccezionale, soprattutto considerando la notevole capacità di accumulo di energia offerta. Inoltre, vale la pena notare che utilizzando un caricabatterie da 100 W, il processo di ricarica sarà ancora più rapido. La possibilità di ricaricare rapidamente il power bank è un vantaggio significativo, che garantisce di poterlo utilizzare in tempi relativamente brevi. In conclusione, l'ANKER Power Bank si distingue per la sua struttura di alta qualità, il display LCD informativo e l'impressionante velocità di ricarica. Sebbene possa sembrare un po' pesante in mano, questo è compensato dalla notevole capacità di accumulo di energia. L'inclusione del display LCD rappresenta una vera svolta, offrendo preziose informazioni sul consumo energetico e sulla durata residua della batteria. E il tempo di ricarica rapido, ulteriormente ottimizzabile con un caricabatterie da 100 W, lo rende una scelta comoda per chi necessita di una fonte di alimentazione affidabile in movimento. Se cercate un power bank ad alta capacità e ben costruito, l'ANKER Power Bank è sicuramente un investimento valido.