Rough Country 2.5" Lift Kit for 2011-2022 Jeep Grand Cherokee WK2-60300

GREAT LITTLE KIT.. LIFTED MY JEEP GRAND CHEROKEE A GOOD 2.5 INCHES. MAKES IT LOOK EXACTLY THE WAY IT SHOULD HAVE LEAVING THE FACTORY. MY TRUCK SEEMED SUPER LOW WHEN I FIRST GOT IT. ALMOST FELT LIKE SOME SORT OF SOCCER MOM STATION WAGON .. IT WAS PATHETIC LOOKING. NOW WITH THE LIFT AND SOME 275/65/18'S ON IT, IT LOOKS GREAT. TIRES ARE A LT VERSION SO THEY RIDE A LITTLE ROUGH BUT PRIOR TO THE TIRES WITH THE FACTORY GOOD YEARS ON IT, RAN JUST AS SMOOTH WITH THE LIFT. VERY COMFORTABLE RIDE AND LOVE THE WAY IT LOOKS. A BIT OF A PAIN IN THE BUTT TO INSTALL, BUT IF YOU'RE PATIENT ENOUGH AND ARE A BIT OCD LIKE MYSELF, THE PAY OFF IS WORTH IT ON SAVINGS FROM HAVING A SHOP INSTALL IT.

this is the most cost effective to lift your WK2. No need to change your stock suspension system. just plug and play. no other modification is required. I have been used this 4 years and no issue. Built quality also best, since Rough Country is already famous on this field

First note: This is not an amateur install. So make sure you research if you plan on doing it yourself. I did it in my garage with a buddy, so it can be done, but prepare yourself. The rear was cake! The front struts are a whole different story. Suspension experience/knowledge and the right tools is a big plus. Second Note: Plan on an alignment when completed. I still give it 5 stars overall regardless of the tough install because it made a huge difference in looks without compromising the great ride. Especially after adding a new set of wheels and tires. Check the offset to make sure they don't rub. I went with a 17x9 with +12 offset and 265/70R17.

the product does not match the picture. low quality, just plastic spacers came. how will they hold the load on the road? if I couldn't even just tighten it, it burst. because I started work late, I can't even return it 😏.

So far I have had a good experience with this item. It does exactly what it says. Lift and level. The ride quality stayed the same as well aside from the obvious tire tread difference. Installation was simple from what shop told me. Install + alignment was about $550. This may help anyone gauge price to do the work. Anything over 600 I would say is too much. I had a performance shop do it because they are no stranger to figuring things out with aftermarket parts. They had to use a ratchet straps to pull the wheels into alignment. Also, I'm running 33x12.5x20 ridge grappler tires on a 9x20 wheel. Only modification needed to wheel well was to fold over the pinch weld and pull back cloth liner to remove the slack. Here's the important part for anyone trying to run 33s..... GET YOUR OFFSET RIGHT! haha. That's important and I researched for 1 month. No one has any real info online for this vehicle. Just forums with people arguing. I have a +30 offset wheel which allows the 33 to fit. RC claims a +38 offset needs no modifications at all with an 11.5 wide tire. I wanted a small aggressive poke on the sides and a wider footprint tire. If you want 33s and a lower offset or perhaps a 0 or - offset, be prepared to chop the fender outside liner up and you'll look crappy.

Good morning, I don't understand why the front spacer material is plastic. it's not conform with the picture.

Muy confiable

Had to pay a local shop $550 to install and took them about 4 hours. If you want to run stock rims you will need at least a 1/4” 5x5 spacer to run almost anything. The bolt from the control arm will lay on top of the tire if not. I tried 2 different tires and went with a 285/55/20 ridge grappler. Looks super clean in person but was a huge hassle to get them to fit. The lift also squeaks a good amount when I stop and go. Not noticeable to average person but if you are OCD like me it will drive you insane. Took it back to the local shop and they couldn’t find the problem. Overall it’s a good look but some things could defiantly be improved.

It’s a leveling kit actually, it’s good though.

Great kit done 42,000 kms no problems

Well packed & Received delivery prior to due date. It Fits very well in Durango 2014, as chassis for Grand cherokee & Dodge durango are same, Thou installation looks easy, it must be installed by a professional mechanic as refitting is little tricky. Also I feel its lifted more than 2.5 inch, well its look heavy beast now. In my case- stock suspension feels bit more softer than before and Now durango leveling is straight, before its front side was bowed too much.

Important read this. I bought this kit and installed myself. Watch youtube videos. The front strut install mark bearing plate, spring and rubber isolator together as reinstall they will all stay the exact same way. Only thing Turing 180 degrees is bottom of front strut mount where it bolts to control arm. I used OTC clamshell spring compressor for front struts. Bench mounted compressor would be even better. Do not use any cheaper spring compressor it will not work. I tried this and very scary. Now for the rear this kit will only lift 1/2 inch, if your jeep already has no rake stance and sits level before kit your front end will be higher after install. I like rake stance and tow trailers. I installed a supreme suspension 2 inch lift in rear. My jeep is raised and still has nice rake stance. I installed newer jeep gladiator 18 inch wheels and 18 inch is important here. The front wheels required 1/4 inch wheel spacers as when new front brakes installed it will hit rims. With worn front brakes it will clear caliper. I have standard brakes with solid rear rotors and regular coil spring suspension. This is important if your installing newer jeep 17 inch wheels research as needed spacers or adaptors will be different than for the 18 inch gladiators I have.

Me hicieron falta piezas, hice la devolución hace dos meses y es día que no me han reembolsado nada, además la calidad del producto es mala son piezas de plástico , encargué otro kit con otro proveedor y nada que ver eran piezas de metal. Espero y el vendedor lea mi comentario y me apoye con el reembolso